Supplies for TreeMaking Since 2011
Aluminum corrugation jigs (make your own aluminum corrugations). A bunch of different drawings.
Picture
corrugation block valley
Picture
corrugation wider fits in the valley
Picture
rub aluminum with this "roll w/hole" (new one has a hole in the middle)
corrugation_jig_block_valley_thing.stl
File Size: 3 kb
File Type: stl
Download File
ho_s_corrug_test.stl
File Size: 104 kb
File Type: stl
Download File
corrugation_wider.fcstd
File Size: 1478 kb
File Type: fcstd
Download File
top_ridges_flat_panel_s_scale.stl
File Size: 128 kb
File Type: stl
Download File
panel_s_scale_corrug.stl
File Size: 81 kb
File Type: stl
Download File
roll_w_hole_s_scale.stl
File Size: 1642 kb
File Type: stl
Download File
chimney_x_4_positive_prints_six.stl
File Size: 138 kb
File Type: stl
Download File

Fisherman with Waders and Reel

Here's a unique fisherman printable on a resin-printer in three scales included, HO, S, and O.  You can see some examples of him in printed form, painted and unpainted on our FIGURES page. Thanks!

Fisherman with Waders and Reel features, STL FILES +others DOWNLOAD

STL file download, Chitubox download, and .Photon download for Fisherman with Waders and Reel. We paint using Model Air colors and tiny brushes under good magnification. Drill a tiny hole and add a short section of fine wire for a pole. HO, S, and O scale digital models. Price is for one download.

$
12.99    
Here are some advanced drawings for which there is a nominal fee for a STL printable, scaleable download.

Cape Blanco Lighthouse

These downloadable STL files will allow you to print the main tapered cylindrical body of the lighthouse. We don't have a STL file yet for the oilroom. We did the lantern room in actual glass and K&S brass so I don't have a file for that either. I can get you the plans if you want them! Just email me. -Rog
Lighthouse, Cape Blanco, Bottom

This is a digital download STL file of the bottom section 1/3 of the Cape Blanco Lighthouse without the attached oilroom. Not a physical product, but printable on a 3D printer. Price is for one download.

$
12.95    
Lighthouse, Cape Blanco, Middle

This is a digital download STL file of the middle section 2/3 of the Cape Blanco Lighthouse. Not a physical product, but printable on a 3D printer. Price is for one download.

$
12.95    
Lighthouse, Cape Blanco, Top

This is a digital download STL file of the top section 3/3 of the Cape Blanco Lighthouse. Not a physical product, but printable on a 3D printer. Price is for one download.

$
12.95    
Lighthouse, Cape Blanco, Lens

This is a digital download STL file of the first order lens c.1897 for the Cape Blanco Lighthouse. Not a physical product, but printable on a 3D printer. Price is for one download. I put a photon setup in here too since this is a resin print.

$
12.95    
Lighthouse, Cape Blanco, Lantern Dome

This is a digital download STL file of the lantern dome for the Cape Blanco Lighthouse. Not a physical product, but printable on a 3D printer. Price is for one download.

$
12.95    
Picture
Cape Blanco Lighthouse in 1/64 "S" scale with first order Fresnel lens. The printable lens is hollow in the middle to accommodate a warm LED to represent the light. We printed this from clear resin on the ANYCUBIC Photon 3D resin printer.
The first order lens used on this model was drawn from the original plans for the actual Fresnel lens.
Picture
Only from this angle with the model now in the Visitor's Center can it be photographed with the real Cape Blanco Lighthouse in the background! Notice the orientation of the model in the Visitor's Center is such that it nearly matches that of the real one. Also note the difference in lens sizes, which reflects that the first-order lens is in the model whereas a fourth-order lens is in use in the real lighthouse.